• Water based paint 水基涂料
• Contains silicates 含硅酸鹽
• Used in gas nitriding furnaces 用于氣體氮化爐
• Not suitable for molten salt or fluidized bed furnaces 不適合用于在熔鹽浴或液化床爐子中
• Designed for typical nitriding cycles 適用于典型滲氮周期
– 495 - 565oC
– Minutes – Hours 幾分鐘 --- 幾小時
• The more severe the cycle, the closer our recommendations should be followed
周期越是嚴密,越要嚴格遵守我們下面列出的建議事項
• Properly mix 適當?shù)幕旌?br />
• Parts should be clean and dry 零件必須干凈干燥
• Up to two coats are applied (0.010” – 0.020”)
可以選擇涂2層涂料(0.25毫米 --- 0.50毫米)
• Air dry 10-30 minutes 空氣中放置10-30分鐘讓涂層變干
• After nitriding, coating residue may be removed with hot water
氮化后,涂層殘留物可以用熱水清洗去除。 |